Search This Blog

Saturday, November 21, 2020

Orbital Speeds

 

 Orbital Speeds                                    re = 6371 km

 

1.    Geostationary satellites are used for telecommunications. They appear not to move in the sky. However they do orbit the Earth with a period of 1 sidereal day. (23 hours 56m). There are two other conditions for the satellite to remain above one point on Earth. Over the equator, East à West,

Geostationary satellites orbit the earth at an altitude of 35 786km. Calculate their speed.

T = (23 x 60) + 56 min) = 1436 min x 60 sec =86160 s

r = height + re = 6371 +35786= 42157 x1000 m = 4.22 x107m

 = (2 x 3.142 x 4.22 x107) / 86160 = 3074 ms-1

Similar satellites orbit Mars at an altitude of 17 031 km.  The length of a Martian day is similar to that of the Earth, why are the altitudes so different? .

Mars has less mass than the Earth

Calculate the speed of an Arestationary satellite. Tm = 88642.66 rm = 3396.2 km. 1448 ms-1

 

2.    GPS satellites orbit at a height of 20 200km. Their orbital period is 11h 58min earth time (– their time is about 20 microseconds faster due to the relativistic effects of their motion and the Earth’s mass bending space-time). Calculate their orbital speed. 3900 ms-1

 

3.    NASA’s Mercury messenger probe orbited the planet at an altitude of 201 km, (rm = 2.44 x 106m) with a period of 5.75 x 103 s Calculate its speed. 2900 ms-1

 

 

 

4.    Complete this table

Distance from Sun (106 km)

Orbital Period (days)

T (Years)

Orbital Speed m/s

MERCURY

57.9

88

0.241096

48 000

VENUS

108.2

224.7

0.615616

35 000

EARTH

149.6

365.2

1.000548

30 000

MARS

227.9

687

1.882192

24 000

JUPITER

778.6

4331

11.86575

13 000

SATURN

1433.5

10747

29.44384

9700

URANUS

2872.5

30589

83.80548

6800

NEPTUNE

4495.1

59800

163.8356

5500

PLUTO

5870

90588

248.1863

4700

 

5.    There are 5 planets orbiting the star tau Ceti (12 light years away and similar to our sun although it’s slightly cooler, 5344K compared to 5778K ) The planets are called a,b,c,d e&f.

Tau Cati F orbits at 1.35 AU from the star. (1AU = 150 million km) with a period of 1.76yrs. Calculate its orbital speed. 22 000 ms-1

(Assuming that Tau Ceti f is a terrestrial planet, it would likely be at least 2.3 times larger in size than the Earth. With an Earth-like atmosphere, the surface temperature would be approximately −40°C (233 K). With a denser atmosphere able to produce a stronger greenhouse effect it could have a much higher temperature, between 0°C and 50°C, enough for complex life to exist.)

Wednesday, November 18, 2020

Paying for electricity




1.   21.6p            18.1p

2.   £1.16

3.   0.54kWh

4.   0.42 kWh       0.112p + 3.79p = 3.9p
5.   4.46p            9.34p

Prep on Planet Odyssey

 

(a)     arrow towards centre of planet                                                                                      1

(b)     (i)      g = GM/R2 (Do not allow r)                                                                       1

(ii)     gS/gO = R2/25R2; gS = 40/25 (= 1.6 N kg–1)                                               2

(iii)     gC/gO = R2/16R2 giving gS = 40/16 (= 2.5 N kg–1)                                     1

 

Inverse Square Law

 



Gravitational Fields Prep

 


Monday, November 16, 2020

F=BILsin theta


1.       A vertical wire carrying a current of 5A is situated in a uniform horizontal magnetic field of 4x10-3 T. Calculate the magnitude of the force on the wire if the length of the wire in the field is 0.4m. Draw a sketch showing the direction of the force on the wire when the current flows (i) upwards and (ii) downwards.   8x10-3N
2.       Calculate the force on a wire of length 0.1 m carrying a current of 10A if it is (i) perpendicular, (ii) inclined at 300 (iii) parallel to a field of 1 x10-2 T  0.01N, 0.005N, 0N.
3.       The diagram shows a simple current balance. The loop is balanced when no current flows, and no masses are added. The straight part of the wire is 15cm long and is crossed by a magnetic field of 2.0 x10-3 T. The current in the wire is 1.0 A. What mass must be hung from the other side in order for the system to balance? g=9.81 ms-2
31mg

4.       A metal wire 10m long lies east west on a wooden table. What pd would have to applied to the ends of the wire, and in what direction, in order to make the wire rise from the surface. Assume that the electrical connections to wire cause no appreciable constraint.
(density of the metal = 1.0 x 104 kgm-3, resistivity of the metal = 2 x 10-8 Ωm, horizontal component of the earth’s magnetic field = 1.8 x 10-5 T, g = 9.81 Nkg-1) 1.1kV WàE


Wednesday, October 07, 2020

Resistance calculations

 

1.       A motor has a resistance of 12 Ω. If the supply voltage is 6 V calculate the current flowing through it.

I = V/R = 6/12 = 0.5A

2.       A current of 0.55 A flows through a resistor of value 22 Ω. Calculate the voltage across the resistor.

V = IR = 0.55 x 22 = 12.1V

3.       See circuit diagram opposite. A bulb has a resistance of 9 Ω. The reading on the ammeter is   0.17 A. Calculate the reading on the voltmeter.

V = IR = 0.17 x 9 = 1.53V

4.       A motor has resistance of 210 Ω. A voltmeter placed in parallel with the motor reads 5 V. calculate the current flowing through the motor.

I= V/R = 5/210 = 0.024A

5.       A power supply is set to 9V. Calculate the current flowing through a 1.2 kΩ resistor.

1.2kΩ = 1200Ω Using I=V/R = 9/1200 = 0.0075A

6.       A torch bulb is connected to a 3V battery. It has a resistance of 8.5 Ω. Calculate the current flowing through it.

I = V/R = 3/8.5 = 0.35A

7.       A light bulb is connected to a 240V supply. A current of 0.24 A flows throug it. Calculate the resistance of the bulb.

R=V/I = 240/0.24 = 1000Ω

8.       An electric drill is connected to a 240V supply. A current of 4 A flows through it. Calculate its resistance.

R=V/I = 240/4 = 60Ω

 

9.       The reading on the ammeter in the circuit opposite is 1.69 A. The reading on the voltmeter is 10.9 V. Calculate the resistance of the bulb.

R=V/I = 10.9/1.69 = 6.5Ω

Ohm's Law

1 Find the current through a resistor of 20 Ω if the potential difference across it is 0.5 V.
I = V/R = 0.5/20 = 0.025A = 25mA

2 When a p.d. of 2 V is applied across a resistor the current is 0.1 A. What is the value of the resistor? R= V/I = 2/0.1 = 20 Ω

3 A p.d. of 100 V is applied across a resistor of 2 kΩ. What is the current?
I = V/R = 100/2000 = 0.05A
4 What p.d, will produce a current of 2 mA through a resistor of 4 kΩ?
V = I R = 0.002 x 4000 = 8V

5 Find the value of a resistor if a p.d. of 2 V produces a current of 0.5 μA.
R = V/I = 2/0.5 x10-6 = 4000000 = 4MΩ
6 Find the current through a 1.5 MΩ resistor when a p.d. of 4.5 V is applied.
I = V/R = 4.5/1.5 x106 = 3 x 10-6A

7 A lamp operated by a 240 V supply takes a current of 0.625 A. Find the resistance of the lamp.
R = V/I = 240 /0.625 = 384 Ω

8 A coil of very fine copper wire is found to take a current of 0.75 A when a p.d. of 4.5 V is applied. If the wire has a resistance of 1.5 Ω per metre, what length of wire is in the coil?
R = V/I = 4.5/ 0.75 = 6 Ω

Length = 6 Ω/1.5 Ωm-1 = 4m

Tuesday, October 06, 2020

Electron Beam worksheet

 

1        (i)      beam current or intensity is reduced (1)
(because) fewer electrons are emitted (per sec) from the filament (1)
[or no beam as no electrons emitted if voltage of A
reduced enough (1)
(only)]

(ii)     electrons travel faster [or more kinetic energy] (1)
(because the force of) attraction to the anode is greater (1)                                    4

[7]

          2   (a)           KE  = 1.6 x 10-19 x 25 x 103;

         

(b)     A calculation to include:

1. K.E. = ½ x m x v2;

2. 4 x 10-15 = 0.5 x 9.1 x 10-31 x v2;

3. v = 9.4 x 107 ms-1;                                                                                           3

.        

3        current = charge flow/ second or I = Q/t;
            = 9.0 × 10
15/s × 1.6 × 10 –19C;
            = 1.4 × 10
–3A;                                                                                                 3

Tuesday, September 29, 2020

The volt

 

Volt

                                V = E/Q                 1 Volt = 1 Joule / 1 Coulomb

1.       Calculate the potential difference across a bulb if 20 C transfers 4 J of electrical energy.   

V = 4 J /20 C = 0.2 V

2.       Calculate the emf across a dynamo if 600 J of energy is transferred by 25 C of charge.

V = 600 J / 25 C = 24 V

3.       A bulb has a potential difference of 6V across it. Calculate the energy is transferred by 90 C.

E = V x Q = 6 V x 90 C = 540 J

4.       A train motor operates on a potential difference of 25 kV .Calculate the charge that transfers  800 kJ of electrical energy.

Q = E / V = 800000 J / 25000 V = 32 C

5.       A torch bulb runs off a cell of emf 1.5V Calculate the energy transferred by a charge of 0.27 C

E = V x Q = 1.5 V x 0.27 C = 0.41 J

6.       A bulb takes a current of 0.25 A. How many Coulombs per second? 0.25 C per second It transfers 60W of powerHow many Joules per second? . 60 J per second

Calculate the emf of the supply. V = E ÷ Q = 60 / 0.25 = 240 V