Search This Blog

Thursday, November 26, 2015

Gravity QUestions


 1.      (i)      r has been increased by a factor of 3 from the centre of planet.                    C1
g = (40/32 =) 4.4(4) (N kg–1)                                                                          A1
  (ii)   M = gr2 / G
M
= (40 × [2.0 × 107]2) / 6.67 × 10–11                                                            C1
M = 2.4 × 1026 (kg)                                                                                        A1
  (iii)  M = ρV = 4/3 πr3 ρ                                                                                         M1
g = GM / r2  r3 / r2 (Hence g  r)                                                              A1
[6]

2        The astronaut is accelerating / has centripetal acceleration (1)
and the space station has the same acceleration (1)
a person does not feel gravity (1)
only feels forces applied by contact with the walls of the space station (1)
no support force from the space station (as they have the same acceleration) (1)      4
MAXIMUM (4)
[4]

 3.      Period 24 hours (1)
Satellite must stay locked into Earth’s period of rotation (or wtte) (1)
          Plane Equatorial (1)
Centre of orbit must be centre of Earth because axis of orbit must be spin axis of Earth (1)
(gravitational force above equator is only force available to provide
centripetal force in a synchronised orbit, otherwise an engine is required)
          Direction Same as Earth’s rotation (1)
(otherwise satellite and Earth would counter rotate)
[5]

  4.     (a)     i. F = GMm/r2 or F α Mm/r2 with labels (1)                                                       1
ii. finite universe contracts/ resultant force on stars (1)                                    1
  (b)   Any 2 from
i. (satellite B) has larger circumference/smaller velocity
(satellite B) Gravitational field strength is less
(satellite B) Centripetal force is less                                                                  2
          ii.(accept calculation from either satellite)
r13/ T12 = r23/ T22 (1)
satellite A                                satellite B
r23 = 70003 × 57.22 / 1.632      r23 = 671003 × 57.22 / 1.632 (1)
r2 = 75,030 km                        r2 = 75, 320 km (1)                                           3
(= 75,000 km)                         (= 75,000 km)
  (c)   Land-based are (any 3) 1 mark for each
more light can be collected/ made larger
more stable
more manoeuvrable
cheaper to build/repair
longer lifetime/ not exposed to high velocity particles
greater access                                                                                                   3
[10]


  8.     (i)      4.5 (N kg–1)                                                                                                      1
(ii)     g = (–)GM/r2                                                                                                     1
(iii)    g ∞ 1/r2;so value is 40/9 = 4.4(4) (N kg–1) ecf c(i)                                            2
[4]




× 2.0 × 107/(4.5 × 103) = 2.8 × 104 m s–1 (2)
½ mv2; = 0.5 × 1500 × (2.8 × 104)2 = 5.9 × 1011 (J) (2)                                             4
aliter: F = mv2/R; = mg; so ½ mv2 = ½ mgR;= 6.0 × 1011 (J)
[8]



Wednesday, November 11, 2015

Tuesday, November 03, 2015

Divided Circuits

  1. Two resistors of 3Ω  1.4A and 7Ω 0.6A are connected in parallel. If the total current through them is 2 A find the current in each resistor. 
  1. Two resistors of 2 Ω 2A and 4 Ω 1A are connected in parallel. If the current through them is 3 A find the current in each resistor.

  1. Three resistors of 2 Ω 4 Ω 0.5A and 8 Ω 0.25A are connected in parallel in a circuit. The current in the 2 Ω resistor is 1 A. What is the current in the other two resistors? What is the total current in the circuit? 1.75A

  1. Three resistors of 4Ω 0.5A, 5Ω 0.4A and 20Ω 0.1A are connected in parallel. If the total current through them is 1 A find the current through each resistor.

  1. Ammeter X reads 2 A. What are the readings of am­meters A, 4A B1A, C 1A and D 4A?
  1. A resistor of 2 Ω and another of 7Ω are connected in series, and a 3Ω resistor is connected in parallel across the other pair. If the total current through the network is 2 A, find the p,d. across the 7Ω resistor. 3.5V

Thursday, October 15, 2015

The Volt

Volt

                                V = E/Q                 1 Volt = 1 Joule / 1 Coulomb
1.       Calculate the potential difference across a bulb if 20 C transfers 4 J of electrical energy.
V = 4 J /20 C = 0.2 V
2.       Calculate the emf across a dynamo if 600 J of energy is transferred by 25 C of charge.
V = 600 J / 25 C = 24 V
3.       A bulb has a potential difference of 6V across it. Calculate the energy is transferred by 90 C.
E = V x Q = 6 V x 90 C = 540 J
4.       A train motor operates on a potential difference of 25 kV .Calculate the charge that transfers  800 kJ of electrical energy.
Q = E / V = 800000 J / 25000 V = 32 C
5.       A torch bulb runs off a cell of emf 1.5V Calculate the energy transferred by a charge of 0.27 C
E = V x Q = 1.5 V x 0.27 C = 0.41 J
A bulb takes a current of 0.25 A. How many Coulombs per second? 0.25 C per second It transfers 60W of powerHow many Joules per second? . 60 J per second

Calculate the emf of the supply. V = E ÷ Q = 60 / 0.25 = 240 V

Wednesday, October 07, 2015

Circular Motion _London Eye

(a)     (i)      speed v = 2π r / t
v = 2 × π × 122/2 /(30 × 60) (1)
v = 0.21 m s–1 (1) allow 0.2 m s–1                                                           2
  (ii)   F = 12.5 kN × 16 = 200 kN (1)                                                                1
(iii)    W = F × s or
= 200 k × 2 × π × 122 / 2 (1) ecf (ii) allow ecf for distance from (i)
= 7.7 × 107 J (1) allow 8 × 107                                                                2
  (iv)  P = W / t, energy / time or F × v or
= 7.67 × 107 / (30 × 60) (1) or ecf (iii) / (30 × 60)
= 42.6 kW (1) allow 43 kW, only allow 40 kW if working shown             2


(v)     •        Friction force at bearing opposes motion so not useful (1)
•        Friction force of tyres on rim drives wheel, so is useful (1)
•        Electrical energy supplies power to drive wheels /
          useful implied (1)
•        Input energy (electrical or energy supplied to motor)
          is converted into heat (1)
          Last point to do with the idea that once moving with constant speed e.g.
•        All work is done against friction
•        No input energy is converted into Ek
•        All input energy ends up as heat
•        Any other relevant point relating to energy (1)                              5

  (b)   (i)      k = F / x
= 1.8 × 106 / 0.90 (1)
= 2.0 × 106 Nm–1 (1)                                                                               2

the pendulum bob is travelling in a circle (1)
so it is accelerating towards the centre (1)
(it has a constant speed in the time interval just before vertical to just
after vertical)
          bob is not in equilibrium (1)
so the tension must be (slightly) larger than the weight of the bob (1)                        3
MAXIMUM 3

Wednesday, September 16, 2015

Electric Current

Electric current
  1. Calculate the average electric current in a wire when a charge of 150 C passes in 30s? I = Q/t = 150/30 = 5A
  2. The current in a small torch bulb is 0.20 A. What total electric charge which passes through a point circuit in 12 minutes? 1.4 x102How many electrons pass through this point in this time? 1.4 x102 /1.8 x 10-19 = 9 x 1020
  3. In the circuit opposite the three bulbs are identical and reach hill brightness when the current is 0.20A. Bulb B is observed to be at full brightness. Which (if any) of the other bulbs will be at full brightness, and what is the current in each of them? B,C
B = 0.2A, C = 0.2A, D = 0.05A

  1. A new electric cell was joined in series with a bulb and an ammeter. The initial current was 0.30 A. At subsequent intervals of 1 hour the readings on the ammeter were: 0.27A, 0.27A, 0.26A, 0.25 A, 0.23A, 0. 19A, 0.09A, 0.03 A, and at 9 hours the ammeter reading had become negligibly small.
    (a) Plot a graph of current against time.
    (b) What does the area under the graph represent? Total charge
    (c) How much electric charge passes through the circuit when a current of 0.10 A passes for 1 hour? 360C
    (d) What is the total electric charge which passes through the cell in the 9 hours? 6.3kC
  2. In a gas discharge tube containing hydrogen the current is carried partly by (positive) hydrogen ions and partly by electrons. An ammeter in series with the tube indicates a current of 1.5 mA. If the rate of passage of electrons past a particular point in the tube is 6.0 x 1015 s-1, find the number of hydrogen ions passing the same point per second. 3.4 x1015 s-1

Tuesday, September 15, 2015

Bobsleigh




Mark scheme for conical Pendulum

1 Explanation
There is a resultant (or net or unbalanced) force
􀀹
Plus any 3 of following:-
Direction of motion is changing 􀀹
Velocity is changing 􀀹
Velocity change implies acceleration 􀀹
Force produces acceleration by F = ma (or N2) 􀀹
Force (or acceleration) is towards centre / there is a centripetal
force (or acceleration) / no force (or acceleration) parallel to
motion
􀀹
No work done, so speed is constant 􀀹 Max

3

Mark Scheme for Washing Machine circular motion 6


Stone on String


Child on a Swing


Test on Momentum






Tuesday, September 08, 2015

Wednesday, January 21, 2015

Charge and Current

Charge and Current

•The charge carriers are usually electrons; q = e=  -1.60 x 10-19 C; but be careful when a current of ions exists.

The value of n for copper is 8.0 x 1028 m3.

  1. Calculate the current in a copper wire with area of cross section 2.0 x 10-5 m2 when electrons drift through it with a mean speed of 0.80 mms-1
I = nAve = (8.0 x 1028) (2.0 x 10-5) (0.80 x 10-3) (-1.60 x 10-19) = -205 A

  1. In a silicon transistor with area of cross section 3.8 x 10-6 m2 there is a d.c. current of 200 mA. The current is a flow of electrons and the number density of free electrons for silicon is 8.3 x 1023 m3. Determine the mean drift speed of the electrons.
I = nAve
rearranging v = I/nAe
v = (200 x 10-3) / (8.3 x 1023) (3.8 x10-6) (-1.60 x 10-19)
v = -0.40 ms-1

  1. The beam of electrons in a cathode-ray tube contains electrons travelling at 8.4 x 106 ms-1 and the current through the tube is 2.8 μA.
    (a) How many electrons are emitted per second from the cathode of the tube?
Q= It = 2.8 x 10-6 x 1 second = 2.8 x 10-6 C
Number of electrons = total charge / e = 2.8 x 10-6 /1.6x 10-19  
= 1.75 x 1013

(b) What is the number of electrons per unit length of the beam?
In 1 s an electron will travel 8.4 x 106 m. this means that 1.75 x1013 will be spread over a length of 8.4 x 106 m. So 1 m will contain 1.75 x1013 electrons ÷ 8.4 x 106 m = 2.08 x 106 electrons

  1. A direct current of 3.0 A through a copper wire reaches a place where the area of cross section of the wire changes from 2.0 x 10-6 m2 to 0.090 x l0-6 m2. By what factor does the drift speed of the delocalised  electrons increase as they move from the wide to the narrow section? Suggest how this indicates that a damaged wire will overheat.
The same current flows through the thick wire as the thin wire, (Kirchoff’s first law)

For the thick part of the wire
I = nAve
rearranging v = I/nAe
v = 3 / (8.0 x 1028) (2 x10-6) (-1.60 x 10-19)
v = -1.17 x 10-4 ms-1
For the thin part of the wire
I = nAve
rearranging v = I/nAe
v = 3 / (8.0 x 1028) (0.090 x10-6) (-1.60 x 10-19)
v = -2.60 x 10-3 ms-1

Ratio = -2.60 x 10-3 ms-1 / -1.17 x 10-4 ms-1 = 22.2

Alternatively
I = nAwvwe = nAnvne
As n and v are constants then Awvw = Anvn
rearranging Aw/An=vn/vw      Aw = 2.0 x 10-6 m2 and An = 0.090 x l0-6 m2
so Aw/An = 2.0 x 10-6/ 0.090 x l0-6 = vn/vw = 22.2

This increase in drift speed will cause more collisions per second between electrons and the crystal lattice transferring more energy to heat

  1. Explain why a light comes on almost immediately when switched on, although the drift speed of the electrons in the wires to the light is so small.
When the circuit is made the electric field propagates through the wire at close to the speed of light. This imposes a net direction from negative to positive on the hitherto random motion of the delocalised electrons



Tuesday, January 13, 2015

2 Potential Difference

12V
12V
100 000s
0.5A       6.0A
20A        Some power will be lost heating the motor
11.5 J

Current = 5.0A   charge = 3000C  energy = 720 000J

Friday, January 09, 2015

V =E/Q

Volt

                                V = E/Q                 1 Volt = 1 Joule / 1 Coulomb
1.       Calculate the potential difference across a bulb if 20 C transfers 4 J of electrical energy.
V = 4 J /20 C = 0.2 V
2.       Calculate the emf across a dynamo if 600 J of energy is transferred by 25 C of charge.
V = 600 J / 25 C = 24 V
3.       A bulb has a potential difference of 6V across it. Calculate the energy is transferred by 90 C.
E = V x Q = 6 V x 90 C = 540 J
4.       A train motor operates on a potential difference of 25 kV .Calculate the charge that transfers  800 kJ of electrical energy.
Q = E / V = 800000 J / 25000 V = 32 C
5.       A torch bulb runs off a cell of emf 1.5V Calculate the energy transferred by a charge of 0.27 C
E = V x Q = 1.5 V x 0.27 C = 0.41 J
A bulb takes a current of 0.25 A. How many Coulombs per second? 0.25 C per second It transfers 60W of powerHow many Joules per second? . 60 J per second

Calculate the emf of the supply. V = E ÷ Q = 60 / 0.25 = 240 V